 |
Stainless Steel housing coupled with our high performance architecture allows for this fully customizable NEMA4X diode laser module.
- Pointing Accuracy less than 2mrad
- Pointing Stability less than 10µrad/ºC
- NEMA4X Environmental Rating
- M12 X 1 Threaded Mounting Sleeve
- 5 or 24VDC Power Options
- Modulation and External Power Control Options
- Fully Customizable
Click here for a full PDF data sheet
Wavelengths Available
375nm, 405nm, 532nm, 635nm, 655nm, 670nm, 780nm, 808nm, 830nm
*Others available upon request
*Others available upon request
Housing Sizes
Ø12.0mm
Length: 40mm
Length: 40mm
Beam Profile
Elliptical Spot, Round Beam, Crosshair, Line, Uniform Line, Diffractive Optical Element Patterns
Output Power
0.97mw - 500mW
Beam Characteristics
Lines/Crosshair: 90°, 70°, 60°, 45°, 30°, 20°,10°, 5° - Focused or Collimated
Spots/Round Beams: Focused or Collimated
Spots/Round Beams: Focused or Collimated
Electronics/Power Supply
Standard CW (2 wire), Modulated TTL (3 wire), Variable Output Power (3 wire)
5VDC or 24VDC
5VDC or 24VDC
Interconnects
IP68/NEMA4X Cable 24 X3 with Polyurethane Jacket
Product Specifications
| External Housing Specifications | |
| Housing Dimensions | Diameter: 12.0mm Length: 40mm |
| Housing Material | Stainless Steel 316 or Equivalent, Electrically Isolated |
| Exit Aperture Protection | Sapphire Window |
| Customization | Dimensions |
| Electrical Specifications | |
| Operating Voltage | 5VDC or 24VDC ± 1% |
| Load Current | 10mA-150mA (Laser and Input Voltage Dependent) |
| Load Current vs. Temperature | 0.7mA/°C Nominal |
| Continuous Wave (Standard Driver) | CW to 1kHz, Full Depth Modulation |
| TTL Modulation (Optional Driver) | CW to 1MHz, Full Depth Modulation |
| Electronic Protection | Reverse Polarity, Over Voltage, Surge Protection |
| Interconnect | IP68/NEMA4X Cable, 24 X 3 with Polyurethane Jacket |
| Customization | Operating Voltage, Interconnect, Modulation |
| Environmental Specifications | |
| Operating Temperature | -10°C to 50°C (60°C, 70°C, 80°C) |
| Storage Temperature | -40°C to 85°C |
| Static Contact Discharge Immunity | >10kV |
| Dust/Water Resistant | NEMA4X |
| Customization | Operating Temperature |
| Optical Specifications | |
| Wavelength Stability | 0.25nm/°C Nominal |
| Optical Power Range | 1-200mW, Single Mode (Varies with Wavelength) |
| Power Output Stability at 25°C | <1% |
| Power Output vs. Temperature | <0.5%/°C Nominal |
| Exit Beam Size | 5.0mm x 1.2mm, 6.1mm x 1.2mm |
| Beam Divergence | <0.7 mrad Nominal, Varies with Optical Configuration |
| Standard Line Fan Angles | 5°, 10°, 20°, 30°, 45°, 60°, 70°, 90° |
| Line Thickness | 1mm @ 1 Meter Nominal |
| Line Thickness Divergence | <0.5mrad Nominal, Varies with Optical Configuration |
| Line Intensity Profile | Gaussian, (Uniform Line Available Upon Request) |
| Lens Material | Glass |
| Customization | Wavelength, Power Output, Spot Size, Fan Angle, Line Thickness, Line Intensity Profile |
| Pointing Specification | |
| Accuracy | <2mrad |
| Stability vs. Temperature | <10μrad/°C |
| Customization | Accuracy |
| Reliability/Regulatory Specifications | |
| Laser Lifetime | >30,000 hrs at 25°C |
| Certification/ Regulatory | CE/ CDRH, IEC 60825-1 |
| Warranty | 2 Years |
| NOTE: Custom Products may/may not conform to these specifications. | |
Other Documents
Labels
CDRH
 |
 |
 |
IEC
 |
 |
 |
 |
 |
 |
Higher Level Assemblies Available
